banner

Factory Supply Polymer Emi Shielding Films - EMI Shielding Film with Good Shielding – Lucky Innovative

Factory Supply Polymer Emi Shielding Films - EMI Shielding Film with Good Shielding – Lucky Innovative

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

With advanced technologies and facilities, strict high-quality handle, reasonable rate, superior services and close co-operation with prospects, we are devoted to furnishing the best price for our customers for Auto Ins Decoration Film , Emi Shielding Foil , Pressure Sensing Film , We encourage you to make get hold of as we've been wanting for companions inside our venture. We are sure you'll uncover doing company with us not only fruitful but also profitable. We've been prepared to provide you with what you require.
Factory Supply Polymer Emi Shielding Films - EMI Shielding Film with Good Shielding – Lucky Innovative Detail:

Product Description

EMI Shielding Film is mainly used in FPC which consist of Modules for mobile phones,PC,medical devices,digital cameras,automotive instruments,etc.

Product Availability

LKES-800
LKES-1000
LEKS-6000

Product Features

(1) Good processing characteristics
(2) Good electrical conductivity
(3) Good shielding properties
(4) Good heat resistance
(5) Environmental friendly (Halogen free, meet requirements of RoHS Directives and REACH, etc.)

Product Structure

Dry film

Product Characteristics

 LKES -800

Item Test Data Test standard or Test method
Thickness (Before Lamination, μm) 16±10% Enterprise Standard
Thickness (After Lamination, μm) 13±10% Enterprise Standard
Ground Resistance(Gold plated, φ 1.0mm, 1.0cm, Ω) <1.0 JIS C5016 1994-7.1
Peeling strength of reinforced film (N/25mm) <0.3 Enterprise Standard
Lead-free Soldering Reflow (MAX 265℃) No stratification; No foaming JIS C6471 1995-9.3
Solder (288℃, 10s, 3 times) No stratification; No foaming JIS C6471 1995-9.3
Shielding Properties(dB) >50 GB/T 30142-2013
Surface Resistance(mΩ/□) <350 Four Terminal Method
Flame Retardant VTM-0 UL94
Printing Character PASS JIS K5600
Glossiness(60°, Gs) <20 GB9754-88
 Chemical resistance(Acid,alkali and OSP) PASS JIS C6471 1995-9.2
Adhesion to Stiffener (N/cm) >4 IPC-TM-650 2.4.9

LKES-1000

Item Test Data Test standard or Test method
Thickness (After Lamination, μm) 14-18 Enterprise Standard
Shielding Properties(dB) ≥50 GB/T 30142-2013
Surface Insulation ≥200 Enterprise Standard
Adhesive Fastness(Hundred cells test) No cell fall off JIS C 6471 1995-8.1
Resistant to Alcohol Wipe 50 Times no damage Enterprise Standard
Scratch Resistance 5 times no Leakage of metal Enterprise Standard
Ground Resistance, (Gold plating, φ 1.0mm, 1.0cm, Ω) ≤1.0 JIS C5016 1994-7.1
Lead-free Soldering Reflow (MAX 265℃) No stratification; No foaming JIS C6471 1995-9.3
Solder (288℃, 10s, 3 times) No stratification; No foaming JIS C6471 1995-9.3
Printing Character PASS JIS K5600

LKES-6000

Item Test Data Test standard or Test method
Thickness (After Lamination, μm) 13±10% Enterprise Standard
Shielding Properties(dB) ≥50 GB/T 30142-2013
Ground Resistance, (Gold plated, φ 1.0mm, 1.0cm, Ω) ≤0.5 JIS C5016 1994-7.1
Ground Resistance, (Gold plated, φ 1.0mm, 3.0cm, Ω) 0.20 JIS C5016 1994-7.1
Release force (N/cm) <0.3 Enterprise Standard
Surface Insulation(mΩ) ≥200 Enterprise Standard
Adhesive Fastness(Hundred cell test) No cell fall off JIS C 6471 1995-8.1
Lead-free Soldering Reflow (MAX 265℃) No stratification; No foaming JIS C6471 1995-9.3
Solder (288℃, 10s, 3 times) No stratification; No foaming JIS C6471 1995-9.3
Flame Retardant VTM-0 UL94
Printing Character PASS JIS K5600

Recommended Processing Condition

Lamination Method Lamination condition Solidification condition

Temperature()

Pressure(kg)

Time (s)

Temperature ()

Time(min)

Quick- Lamination LKES800/6000:180±10LKES1000:175±5 100-120 80-120 160±10 30-60

Note:Customer can adjust the technology based on the real condition when processing.
(1)Peel off protection layer first, and then bond to FPC, 80℃ Heating table can be used for pre bonding.
(2)Laminate in accordance with the above process, take out, and then peel off the carrier film after cooling.
(3)Solidification process.

Packing

(1) Standard Specification of product: 250mm×100m.
(2)After removing static electricity, the products are packed in aluminum foil paper and also put drier in it.
(3) Outside is packed in paper cartons and fixed to ensure the safety of products during transportation and handling, and avoid damage.

Storage and Attention

(1)Recommended Storage Condition
Temperature: (0-10)℃; Humidity: below 70%RH
(2)Attention
(2.1)Please do not open the outside package and balance the shielding film at room temperature for 6 hours before using to reduce the effect of frost and dew on the shielding film.
(2.2)Suggest to be used as soon as possible after take out from the cold storage, in case of quality changing under the normal temperature for long time .
(2.3) This product is not resistant to water phase sealing agent and flux, if having the above processing technology, please test and confirm first.
(2.4) Suggest quick lamination, vacuum laminating needs to be tested and confirmed.
(2.5)Quality guarantee period under the above condition is 6 months.


Product detail pictures:

Factory Supply Polymer Emi Shielding Films -
 EMI Shielding Film with Good Shielding – Lucky Innovative detail pictures

Factory Supply Polymer Emi Shielding Films -
 EMI Shielding Film with Good Shielding – Lucky Innovative detail pictures

Factory Supply Polymer Emi Shielding Films -
 EMI Shielding Film with Good Shielding – Lucky Innovative detail pictures

Factory Supply Polymer Emi Shielding Films -
 EMI Shielding Film with Good Shielding – Lucky Innovative detail pictures

Factory Supply Polymer Emi Shielding Films -
 EMI Shielding Film with Good Shielding – Lucky Innovative detail pictures

Factory Supply Polymer Emi Shielding Films -
 EMI Shielding Film with Good Shielding – Lucky Innovative detail pictures


Related Product Guide:

We are experienced manufacturer. Wining the majority from the crucial certifications of its market for Factory Supply Polymer Emi Shielding Films - EMI Shielding Film with Good Shielding – Lucky Innovative , The product will supply to all over the world, such as: Cologne , Georgia , Algeria , Be sure to feel cost-free to send us your specs and we are going to respond for you asap. We have got a experienced engineering team to serve for the every single comprehensive needs. Free samples may be sent for yourself personally to know far more facts. So that you can meet your desires, please actually feel cost-free to contact us. You could send us emails and call us straight. Additionally, we welcome visits to our factory from all over the world for much better recognizing of our corporation. nd merchandise. In our trade with merchants of several countries, we often adhere to the principle of equality and mutual advantage. It is our hope to market, by joint efforts, both trade and friendship to our mutual benefit. We look forward to getting your inquiries.
  • The sales person is professional and responsible, warm and polite, we had a pleasant conversation and no language barriers on communication.
    5 Stars By Yannick Vergoz from Czech republic - 2017.04.08 14:55
    It is not easy to find such a professional and responsible provider in today's time. Hope that we can maintain long-term cooperation.
    5 Stars By Elsie from New Zealand - 2017.01.11 17:15
    Write your message here and send it to us